_2021 Exhibitor Products

Gulfood Manufacturing 2022


Jimco A/S Hall: Shk Saeed 1 Stand: S1-E49
  • FLO-P
  • FLO-P
  • FLO-P
The second step is to configure the installation to meet space requirements because frequently space is at a premium in process plants. Over the years JIMCO has designed units that can be floor, ceiling, wall, or roof mounted to suit the installation requirements of all our clients. Access for maintenance is also carefully considered. In February 2000 JIMCO received the EU Environmental Award for Cleaner Technology for the development of the Photolytic Oxidation System. The unique operation of the JIMCO FLO-P air purification system ensures that optimum purification of high-temperature exhaust air is achieved. THE PROCESS WORKS AS FOLLOWS: Step 1: Warm contaminated air (primary air) enters the lower part of the unit. Step 2: The primary air passes through a maze filter resulting in the separation of large grease and water droplets. Step 3: Primary air is cooled by mixing it with secondary air from the room (e.g. via a spot exhaust from a production line). The mixed air then passes over a bank of condensation blocks causing further grease/water separation from the air stream. This reduces power consumption during the photolytic oxidation process. Step 4: The photolytic oxidation process is achieved using special low-pressure UV-C lamps that also generate a small quantity of ozone. Exposure to UV-C light breaks down organic compounds in the air and subsequent treatment with ozone completes the oxidation process. JIMCO air-treatment systems are manufactured and supplied for various tasks. The reaction chamber of JIMCO's industrial air cleaning system is made of acid proof stainless steel (316) and contains a number of JIMCO's Photozone lamps™. These are dimensioned for the volume of air required to treat.